Hisense TV Won’t Turn On (QUICK & PROVEN Fix!) In 2023

Experiencing the frustration of a Hisense TV that refuses to power on? You’re not alone. Many have faced this issue, and it’s not always a sign of a broken TV. In this guide, we’ll delve deep into the reasons behind this problem and offer quick and proven solutions to get your TV up and running.

Before diving into the fixes, it’s essential to understand the root causes. Here are some of the most common culprits:

• Faulty power outlet: Sometimes, the issue is as simple as a non-functional power outlet.
• Faulty power cable: A damaged cable can prevent your TV from receiving power.
• Unresponsive remote controller: If the remote isn’t working, you might think the TV isn’t either.
• Faulty HDMI port and cable: A malfunctioning HDMI setup can give the illusion of a non-working TV.
• Defective TV backlight: The TV might be on, but a faulty backlight can make it seem off.
• Misconfigured display settings: Incorrect settings can lead to a blank screen.
• Hardware issues: In some cases, internal components like the power board might be damaged.

   – Why it’s essential: Over time, electronic devices can accumulate minor glitches that disrupt their operation. A power cycle can refresh the system.

   – Step-by-step fix:

• Turn off the TV and unplug it from the wall.
• Wait for about 60 seconds to allow any residual power to dissipate.
• Press and hold the TV’s power button for 30 seconds.
• Plug the TV back in and turn it on.
• Check if the issue is resolved.

   – Why it’s essential: A remote with weak or dead batteries can’t send the necessary signals to the TV.

   – Step-by-step fix:

• Open the battery compartment of the remote.
• Remove the old batteries.
• Insert fresh batteries, ensuring correct polarity.
• Aim the remote at the TV and try turning it on.
• If successful, the TV should respond to the remote’s commands.

   – Why it’s essential: Over time, the remote can accumulate electrical charges that disrupt its functionality.

   – Step-by-step fix:

• Remove the batteries from the remote.
• Press and hold the power button on the remote for 30 seconds.
• Reinsert the batteries.
• Point the remote at the TV and press the power button.
• The TV should now respond to the remote’s signals.

   – Why it’s essential: Dust and debris inside the remote can prevent buttons from making proper contact.

   – Step-by-step fix:

• Carefully open the remote, usually by removing screws.
• Gently blow away any visible dust or debris.
• Use a soft cloth to wipe down the internal components.
• Reassemble the remote.
• Test the remote with the TV to ensure improved functionality.

   – Why it’s essential: A faulty power source can prevent the TV from receiving the necessary electricity to operate.

   – Step-By-Step Fix:

•      1. Unplug the TV and plug in another electronic device to test the outlet.
•      2. If the outlet works, inspect the TV’s power cable for any visible damage.
•      3. Ensure the cable is securely plugged into both the TV and the wall outlet.
•      4. If possible, try a different power cable that’s compatible with the TV.
•      5. Turn on the TV to see if the issue is resolved.

   – Why it’s essential: A malfunctioning backlight can make the TV appear off even when it’s on, as it’s responsible for illuminating the screen.

   – Step-By-Step Fix:

• Turn on the TV and darken the room.
• Shine a flashlight at an angle on the TV screen.
• Look for faint images or movement, indicating the TV is on but the backlight isn’t working.
• If the backlight is the issue, it may require professional repair or replacement.
• In some cases, adjusting the TV’s brightness settings can also help.

   – Why it’s essential: HDMI cables and ports transmit both audio and visual signals. A faulty connection can result in no display or sound.

   – Step-By-Step Fix:

• Ensure the HDMI cable is securely connected to both the TV and the source device.
• Try a different HDMI port on the TV.
• Test with a different HDMI cable known to be functional.
• Check the source device’s output settings to ensure compatibility with the TV.
• If using an adapter, ensure it’s functioning correctly.

   – Why it’s essential: Incorrect settings or software glitches can prevent the TV from displaying correctly. A factory reset restores the TV to its original settings.

   – Step-by-Step Fix:

• Locate the physical buttons on the TV, usually on the side or bottom.
• Press and hold the ‘Volume Up’ and ‘Power’ buttons simultaneously for about 10 seconds.
• The TV should display a reset menu. Navigate using the physical buttons and confirm the reset.
• Allow the TV to restart and complete the initial setup process.
• Check if the TV turns on and displays correctly.

   – Why it’s essential: Capacitors store and release electrical energy. Damaged capacitors can affect the TV’s power and display.

   – Step-By-Step Fix:

•      1. Turn off and unplug the TV.
•      2. Open the TV’s back panel carefully.
•      3. Inspect the capacitors on the board for signs of bulging, leakage, or damage.
•      4. If any faulty capacitors are identified, they should be replaced by a professional.
•      5. Reassemble the TV and test its functionality.

   – Why it’s essential: Internal hardware issues, such as problems with the main or power board, can prevent the TV from turning on.

   – Step-By-Step Fix:

•      1. With the TV unplugged, open the back panel.
•      2. Visually inspect the main and power boards for any signs of damage or burnt areas.
•      3. Ensure all connections and cables inside the TV are securely in place.
•      4. If any hardware issues are suspected, consult with a professional for repair or replacement.
•      5. After any repairs, reassemble the TV and test its operation.

1. Hisense Roku Not Turning On:

   – Why it’s essential: The integration of Roku in some Hisense TVs can introduce unique issues separate from standard models.

   – Step-By-Step Fix:

•      1. Ensure the Roku software is updated to the latest version.
•      2. Disconnect any external devices connected to the TV.
•      3. Restart the TV by unplugging it, waiting for a minute, and plugging it back in.
•      4. If the TV has a reset button, use a pin to press and hold it for about 15 seconds.
•      5. If the issue persists, consider reaching out to Roku support for specialized assistance.

2. Hisense TV Red Light Blinking 3 Times:

   – Why it’s essential: A blinking red light often indicates a specific error or malfunction with the TV.

   – Step-By-Step Fix:

•      1. Count the number of blinks between pauses, as it can indicate a specific error code.
•      2. Disconnect all external devices and see if the TV turns on without them.
•      3. Try a different power outlet to rule out power issues.
•      4. Perform a power cycle by unplugging the TV, waiting, and plugging it back in.
•      5. If the blinking persists, it might indicate a more severe internal issue requiring professional repair.

3. Audio Issues with Hisense TV:

   – Why it’s essential: A TV without sound can diminish the viewing experience, even if the display is perfect.

   – Step-By-Step Fix:

•      1. Check if the TV is muted or if the volume is set too low.
•      2. Ensure the audio settings in the TV menu are correctly configured.
•      3. Test with different channels or sources to see if the issue is consistent.
•      4. If using external speakers, ensure they are correctly connected and functioning.
•      5. Consider performing a factory reset to resolve any software-related audio issues.

You May Also Like:

• How To Return Spectrum Equipment
• Fix: Megapersonal Error Code 701 In 60 Seconds